Limescale is the silent espresso killer. According to Puly Caff, a layer of just 0.3 mm on a boiler or heating element insulates it enough to drop the temperature by around 5 °C. Your machine works harder, heats more slowly, and the shot in your cup turns sour and under-extracted. Hard tap water is common across Europe, so descaling is a fixed part of our routine, and Puly Cleaner Baby (the pack labelled Puly Cleaner® Powder) is the descaler we trust for it.
Why descale with Puly Cleaner Baby
-
Pre-dosed, no guesswork: one 25 g sachet in 1 litre of water is one complete descale.
-
Citric-acid formula: citric and tartaric acid dissolve scale quickly and thoroughly.
-
Made for coffee kit: HACCP-compliant and safe for equipment that comes into contact with food.
-
Odourless and tasteless: after rinsing, nothing carries over into your next coffee.
-
Made in Italy by Asachimici, who have made Puly Caff cleaners for the food industry since 1890.
Which machines it suits
Puly Cleaner Baby is made for home and office espresso machines and electric kettles. It also descales filter coffee machines, boilers, heat exchangers and heating elements. Not suitable for aluminium. If your machine has an aluminium boiler or thermoblock, or its manual sets out its own descaling procedure, follow the manufacturer's advice.
How to descale your espresso machine
- Dissolve 1 sachet in 1 litre of water.
- Pour the solution into the water tank.
- Run the pump, switching it on and off every 30 seconds, until the tank is empty.
- Rinse the tank, fill it with fresh drinking water and run it through the same way until empty.
Descaling a kettle
Dissolve 1 sachet in 1 litre of water, pour it into the kettle and heat it. Switch off, empty, then rinse well with drinking water.
How often should you descale?
It depends on your water hardness. Puly Caff recommends descaling at least every 30 days, before scale starts to clog valves, filters and water lines. One box gives you ten descales, which is roughly ten months of monthly care for one machine.